SR ‘1936’ EMU motor coach underframe pack (Suits 2-Bil, 2-Hal, 4-Lav, some 4-Subs).

Fitted with 8’-9” ‘Central’ motor bogie, standard 8’ trailer bogie. Includes formed etched full-length motor coach floor and bogie centres, cast whitemetal bogie sideframes and trailer bogie pivot, shoebeams, equipment boxes, fuse-boxes, and formed milled brass truss-rods. Requires Black Beetle motor unit - 35mm wheelbase / 14mm wheels, two axles 14mm coach wheels, 4 x pinpoint bearings.

See our photo gallery for close-ups of the completed underframe

SR ‘1936’ EMU motor coach underframe pack (Suits SECR 3-Sub, some 4-Subs).

Fitted with 9’- 0” ‘Eastern’ motor bogie, specification otherwise as above. Requires Black Beetle motor unit - 36mm wheelbase / 14mm wheels, two axles 14mm coach wheels, 4 x pinpoint bearings.

SR ‘1951’ EMU motor coach underframe pack (Suits SR 2/4-EPBs and 2-Haps).

Fitted with 8’– 9” ‘Central’ motor bogie, specification otherwise as above, but with later underframe equipment, including EP brake unit and motor/generator. Requires Black Beetle motor unit - 36mm wheelbase / 14mm wheels, two axles 14mm coach wheels, 4 x pinpoint bearings.

SR ‘1951’ EMU motor coach underframe pack (Suits SR 4-EPBs 5001-5053 as built).

Fitted with 9’- 0” ‘Eastern’ motor bogie, specification otherwise as above, but with later underframe equipment, including EP brake unit and motor/generator. Requires Black Beetle motor unit - 36mm wheelbase / 14mm wheels, two axles 14mm coach wheels, 4 x pinpoint bearings.

SR ‘1936’ EMU trailer coach underframe pack (Suits most SR 1936 2-car EMUs).

Fitted with SR 8’- 9” pick-up bogie, standard 8’ trailer bogie. Includes formed etched full-length floor and bogie centres, cast whitemetal bogie sideframes and pivots, shoebeams, underframe equipment, and formed milled brass truss-rods. Requires 4 axles 14mm coach wheels, 8 x pinpoint bearings.

SR coach brass truss-rod set

Consists of a pair of pre-formed milled-brass truss-rods, and etched brass truss-rod supports, to suit Bulleid suburban stock underframes. (Vertical supports at 31.67mm centres)

SR standard 8’ bogies, with ‘knife-edge’ swing links.                                        Per pair

 Contains etched centres, whitemetal sideframes and brass wire for tie-rods.

S.R. 8’- 9” trailer pick-up bogie.                                                                         Each

 Contains etched centre, whitemetal sideframes and shoe-beams, and brass wire for tie-rods.

S.R. 8’- 9” ‘Central‘ motor bogie (builds as trailer bogie                                    Each

 Contains etched centre and washers, whitemetal sideframes & shoe-beams.

 S.R. 9’- 0” ‘Eastern‘ motor bogie (builds as trailer bogie)                                   Each

 Contains etched centre and washers, whitemetal sideframes & shoe-beams.

S.R. 8’- 9” ‘Central‘ motor bogie (to fit Black Beetle motor unit)                          Each

 Contains etched centres, whitemetal sideframes and brass wire for tie-rods.

S.R. 9’- 0” ‘Eastern‘ motor bogie (to fit Black Beetle motor unit)                          Each

 Contains etched centre and washers, whitemetal sideframes & shoe-beams, and turned pivot

Motor bogie and wheel pack to suit DMU power car        

 Includes Black Beetle 34mm wheelbase (8’ - 6”) with 12mm dia. Wheels, plus 2 axles 12mm trailer wheels and pinpoint bearings

Motor bogie and wheel pack to suit EMU power car

 Includes Black Beetle 35mm wheelbase (8’ - 9”) with 14mm dia. Wheels, plus 2 axles 14mm trailer wheels and pinpoint bearings
 

Motor bogie and wheel pack to suit EMU power car

 Includes Black Beetle 36mm wheelbase (9’ - 0”) with 14mm dia. Wheels, plus 2 axles 14mm trailer wheels and pinpoint bearings
 

Trailer coach wheel pack

 Includes 4 axles 14mm wheels, and pinpoint bearings for I trailer coach. Suits all our EMU kits